Gaso T600 – 8″ Stroke Triplex Plunger Pump

  • Pump Size:
    • maximum plunger size x stroke length, in (mm):
    • 7.000 x 8.000 (177.8 x 203.2)
  • Rated BHP (kW) at 260 RPM: 622 (464)
  • Rated plunger load, pounds (kg): 35500 (16103)
  • Maximum discharge pressure: psi (kPa)
    • “XL” model: 1640 (11307)
    • “L” model: 2220 (15307)
    • “M” model: 3705 (25546)
    • “MS” model: 6170 (42542
  • Crankshaft extension:
    • Diameter, in (mm): 7.000 (177.8)
    • Length, in. (mm): 12.000 (304.8)
    • Keyway: width x depth, in. (mm):
      • 1 3/4 x 7/8 (44.45 x 22.22)
    • Maximum recommended sheave diameter, in.(mm): 71 (1803.4)
  • Pinion shaft extension,
    • If gear reducer is supplied, in. (mm)
    • For belt or chain drive: Contact Factory
    • For direct drive: Diameter: 3.000 (76.2)
    • Length: 4 1/2 (114.3)
    • Keyway (width x depth): 3/4 x 3/8 (19.2 x 9.5)
  • Accessory gear reduction unit: 4.433, 6.762
  • Oil Capacity, gallons (L)
    • Crankcase: 48 (181.7)
    • Gear Reducer – varies with ratio: 7 (26.5)
  • Weight, pump only on wood shipping skids, punds (kg) 11125 (5046.3)
    • Weight varies with pump model
  • Standard Materials for Fluid Ends:
    • “XL” model
      • Cast Nickel-Aluminum-Bronze
      • Cast Carbon Steel
      • Cast Duplex Stainless Steal
    • “L” & “M” models
      • Forged Nickel-Aluminum-Bronze
      • Forged & Plate Carbon Steel
    • “MS” model
      • Forged Nickel-Aluminum-Bronze
      • Foged Carbon Steel
PUMP MODEL PLGR DIA IN. MAX PRESS PSI DISP.GAL PER REV. DISPLACEMENT
100 RPM 150 RPM 200 RPM 260 RPM
GPM BPD GPM BPD GPM BPD GPM BPD
T600-3 2 3/4 5980 0.6171 62 2126 93 3189 123 4217 160 5486
3 5020 0.7343 73 2503 110 3771 147 5040 191 6548
3 1/4 4280 0.8618 86 2949 129 4423 172 5897 224 7680
T600-4 3 1/2 3600 0.9995 100 3429 150 5143 200 6857 260 8914
3 3/4 3215 1.1474 115 3943 172 5897 230 7886 298 10217
4 2825 1.3055 131 4491 196 6760 261 8948 339 11623
T600-5 4 1/4 2500 1.4738 147 5040 221 7577 295 10114 383 13131
4 1/2 2160 1.6524 165 5657 248 8503 331 11348 430 14743
4 3/4 2005 1.841 184 6308 276 9463 368 12617 479 16423
5 1810 2.0399 204 6994 306 10491 408 13988 530 18171
T600-7 5 1/4 1440 2.249 225 7714 337 11554 450 15428 585 20057
5 1/2 1440 2.4683 247 8468 370 12686 494 16937 642 22011
5 3/4 1370 2.6978 270 9257 405 13885 540 18514 701 24044
6 1255 2.9375 294 10080 441 15720 588 20160 764 26194
6 1/4 1160 3.1874 319 10937 478 16388 638 21874 829 28422
6 1/2 1070 3.4475 345 11828 517 17725 690 23657 896 30719
6 3/4 995 3.7178 372 12754 558 19131 744 25508 967 33154
7 925 3.9983 400 13714 560 19200 800 27428 1040 35656
Max Break Horsepower Required 240 360 480 625